Common Questions Associated with Skid Steer Auger Bits
When it comes to drilling straight, deep holes, skid steer auger attachments are tops. Skid steer augers are built for drilling straight holes in earth, solid rock, and even asphalt easily and efficiently.
That much is known, but what else are interested buyers and skid steer operators asking? Here are some of the top questions associated with them.
What Are the Common Applications of Skid Steer Auger Attachments?
There is one thing for which skid steer auger bits excel: digging deep, straight holes.
However, despite the unique specialization of these attachments, they can be used for:
- Digging holes for fence posts
- Preparing a site for planting trees
- Drilling holes to set piles
- Preparing a site to lay a foundation
- Heavy duty rock augers can break up rock and frozen ground
- And more
How Deep Can You Drill with a Skid Steer Auger Bit?
How deep you can drill with a heavy-duty auger attachment depends on the specifications of the attachment. Most can reach several feet into the ground. This information should be freely accessible through the manufacturer.
Be aware that most skid steer loader auger drive attachments are compatible with extensions that will push their max digging depth even further.
What Size Auger Bit Do You Need?
That depends on what you are trying to accomplish. Narrower applications call for narrower skid steer auger bits.
For instance, if you are going to be installing fence posts or signposts, you might need a narrower auger, between 4” and 9”. If you’re going to be preparing a foundation, you might need a wider bit.
Planting trees calls for some of the widest auger bits of all; there are auger bits as wide as 48” that are specialized for this application.
How Do I Choose the Right Skid Steer Auger Bit?
Again, this depends on the application of the job. If you are digging in soft earth or sand, a wider, less rugged auger bit can be used. If you are drilling through hard or frozen earth, you will need a tougher, reinforced auger bit.
If you plan on digging through fractured rock or solid rock, be sure to use an appropriate rock auger bit with reinforced teeth and a hardened, reinforced fishtail.
What Else Can You Do with a Skid Steer Auger Bit Besides Dig Holes?
For the most part, these skid steer and mini skid steer attachments are reserved for digging holes, but there are some specialized auger bits that can be used for unique applications.
Take, for instance, Spartan Equipment’s stump planer bit, which looks less like an auger bit and more like a router bit.
This uniquely styled bit is designed to enable operators to grind stumps, in place, wherever needed, and includes a specialized pilot tip that guides and feeds the bit.
Do Skid Steer Augers and Bits Require Any Special Maintenance?
Like all skid steer attachments and accessories, bits require periodic maintenance. For the bits themselves, always check that all fasteners are in place and secure before operation and inspect teeth for signs of wear before use and replace if necessary.
As for the drive attachment, always inspect it for signs of oil or hydraulic fluid leaks before use and repair or replace affected parts as necessary.
Where Can I Get the Toughest Skid Steer Auger Bits & Drives in the Industry?
Here because you’re looking for the toughest attachments in the industry? Look no further than Spartan Equipment online at SpartanEquipment.com.
They carry a wide range of different auger drives and bits and all of their equipment is made with pride in the United States with American steel only – no cheap chinese imports.
For more information, visit the link above or get in touch with them at 1-888-888-1085.
