How To Build A Murphy Bed In 5 Easy Steps?

How To Add Storage Space To Your Murphy Bed

Murphy beds are becoming increasingly popular as more people seek to maximize space in their homes. These innovative beds allow homeowners to convert their bedrooms into a living room or workspace during the day and back into a comfortable sleeping area at night. But buying a pre-made Murphy bed can be expensive, which is why many people are opting to build their own. In this article, we’ll provide you with a step-by-step guide on how to build a Murphy bed in 5 easy steps.

Gather Your Materials

The first step in building a Murphy bed is to gather all of the necessary materials. You’ll need a few pieces of lumber, a sheet of plywood, a mattress, screws, hinges, and a few other basic tools like a saw, drill, and measuring tape. It’s important to make sure that you have everything you need before you start building to avoid any delays or trips to the hardware store.

Build the Frame

The next step is to build the frame for your Murphy bed. This is the structure that will hold your mattress and allow the bed to fold up against the wall when it’s not in use. Start by cutting your 2×4 lumber to the appropriate lengths, according to the size of your mattress. You’ll need two long pieces for the sides of the frame and several shorter pieces to connect them. Once you have all of your pieces cut, use wood screws and wood glue to assemble the frame. Make sure that the frame is sturdy and level before moving on to the next step.

Install the Hardware

The hardware is what makes a Murphy bed functional. You’ll need to install hinges that allow the bed to fold up and down smoothly, as well as a mechanism that holds the bed in place when it’s in the upright position. There are many different types of hardware available, so make sure to choose the right one for your bed. To install the hardware, start by attaching the hinges to the back of the frame. Make sure that they’re properly aligned and secure. Next, attach the mechanism that holds the bed in place when it’s upright. This is typically a metal bar that slides into place when the bed is folded up. Make sure that the mechanism is installed securely and that it works properly.

Add the Plywood

Now it’s time to add the plywood to the frame. Cut a piece of 3/4 inch plywood to the exact size of the frame and attach it to the top of the frame using wood screws. You may also want to add additional support pieces underneath the plywood to ensure that the mattress is well-supported. Once the plywood is in place, sand it down to remove any rough edges and prepare it for painting or staining. If you want to add a finish to your Murphy bed, now is the time to do so. Apply paint or stain according to the manufacturer’s instructions and allow it to dry completely before moving on to the final step.

Install the Mattress

The final step is to install the mattress. Make sure that it fits snugly within the frame and that it’s centered properly. You may also want to add a set of straps or a safety rail to prevent the mattress from slipping or falling off the bed. Congratulations! You’ve now built your own Murphy bed in just 5 easy steps. With a little bit of planning, patience, and hard work, you can create a functional and space-saving sleeping solution that will transform your home.

Leave a Reply

Your email address will not be published. Required fields are marked *